Commercial · St. Augustine, FL
Protect entrances, storefronts, and equipment with concrete bollard installation built for real impact resistance. Serving St. Augustine since 2016, we set steel pipe and architectural bollards in reinforced concrete footings with clean, code-aware layouts.
Prep and base work is where a bollard succeeds or fails. We start with layout and utility locating, then core drill or excavate to the specified diameter and depth based on bollard type, soil, and expected impact. Footings typically run 12-36 inches deep with an 8-18 inch diameter, and we install rebar cages or dowels when needed to control cracking and increase pullout resistance. We set the post plumb, brace it, then place 3,000-4,000 PSI concrete, consolidate, and finish the collar so water sheds away from the post.
St. Augustine’s sandy soils, high water table, and salt air change how bollards should be installed and finished. Where groundwater is a concern, we adjust excavation and placement so the base stays stable and the concrete cures properly, and we can use gravel leveling pads or sonotube forms to keep a clean shaft. For corrosion resistance we commonly install galvanized steel or apply rust-inhibitive primers, then add a powder-coated or painted finish in safety yellow, black, or custom colors. If you want a cleaner look, we can add decorative sleeves, stainless covers, or a formed concrete curb line with a broom-finish or light salt-finish for slip resistance.
St. Augustine customers choose us because we treat bollards like structural protection, not a quick set-and-go post. We show up with the right equipment for tight commercial sites and finished hardscapes, including core drills, augers, compactors, and laser levels for straight lines and consistent spacing. Our crews plan for pedestrian flow, ADA clearances, and vehicle overhang so you get protection without creating trip hazards. You also get clear communication, a written scope, and a jobsite that stays organized from saw cutting through final cleanup.
At the walkthrough we verify plumb, spacing, and exposure height, then confirm the concrete finish, paint, sleeves, or caps match the plan. We review cure times, typical use restrictions, and when the bollards can take full service loads, plus simple maintenance steps to keep coatings intact in coastal conditions. You receive a free written estimate up front, and after installation you get a straightforward closeout that documents materials used, footing dimensions, and the final layout for your records. If you need follow-on work, we can also handle curb repair, sidewalk patching, and matching new concrete to existing slabs.
Yes. We provide a free written estimate that outlines demolition (if needed), base prep, reinforcement, concrete thickness, finish, joints, and timeline.
Yes. We handle saw-cutting and demolition, haul-off, re-grading, compacted base installation, and a new pour with proper jointing and drainage.
When permits or inspections apply, we help coordinate the process and build to applicable Florida Building Code requirements for the scope of work.
Yes. We set forms to match door thresholds and tie into existing concrete where appropriate, using proper joints and dowels when needed to manage movement.
Avoid heavy loads too soon, keep the surface clean, and follow our curing guidance for the first 7-28 days. If sealed, use mild cleaners and avoid harsh chemicals that can degrade the sealer.
Concrete bollard installation is one of the most effective ways to prevent vehicle intrusion, protect pedestrians, and shield storefront glass, fuel pumps, loading doors, HVAC units, and utility meters. St. Augustine Concreters installs fixed and removable bollards for retail, restaurants, multifamily properties, warehouses, and municipal sites, using reinforced concrete footings sized for the application and set for long-term stability in Florida soils.
A professional concrete bollard installation starts with the right layout. We coordinate spacing, edge distances, and setback from doors, curbs, and parking stops, then locate utilities before drilling or excavation. For installations through existing concrete, we core drill clean openings and tie into surrounding slab edges as needed. For new locations, we excavate, set forms (including sonotubes), install rebar where specified, and place 3,000-4,000 PSI concrete with proper consolidation so the footing cures dense and strong.
Bollards can be installed as fixed embedded posts, surface-mounted units anchored to pads, or removable systems with sleeves and locking caps. We help you choose based on traffic patterns, maintenance access, and required protection level, then finish the installation with smooth or broom-finish collars and durable coatings. If your site needs a cohesive look, we can align bollards with existing striping, curbs, sidewalks, and entry features while keeping the work functional and compliant.
If you are planning new parking, a tenant build-out, or a safety upgrade, we can bundle bollards with concrete repair, curb work, and flatwork so everything ties together. Request a free written estimate for concrete bollard installation and we will walk the site, confirm the best placement, and give you a clear plan you can approve.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in St. Augustine. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
